User Manual

ManualsBrandsBrother ManualsHardwareRuggedJet RJ-3050 receipt printer - B/W - direct thermal

Check that the package contains the following before using the printer.

Installing the Rechargeable Li-ion Battery

1. Make sure that the battery latch is lifted up, and then insert the battery

into the battery compartment with the battery cover attached to the

battery. Make sure that the terminal end of the battery is facing inward.

2. With the battery inserted and while pushing the battery lightly into the

cavity, lower the battery latch until it clicks locking the battery in place.

Removing the Rechargeable Li-ion Battery

While pushing the battery lightly, lift the battery latch to unlock the battery, and

then remove the battery.

On: Press and hold the Power button until the POWER indicator is lit in green.

Off: Press and hold the Power button until the STATUS indicator is lit in red.

1. Make sure that the rechargeable Li-ion battery is installed in the printer.

2. Use the AC adapter and AC power cord to connect the printer to an AC

power socket (see Connecting to an AC Power Outlet (Optional)), or

use the car adapter to connect the printer to a DC power socket (see

Connecting to a DC Power Outlet (Optional)).

3. The battery indicator light is orange when the battery is charging.

When the rechargeable Li-ion battery is fully charged, the battery

indicator light turns off. Disconnect the AC adapter or car adapter from

the DC connector.

For details, see the Online User’s Guide.

Connecting to an AC Power Socket (Optional)

Connect the printer to a nearby AC power socket to charge the rechargeable

battery.

1. Connect the AC adapter to the printer.

2. Connect the AC power cord to the AC adapter.

3. Connect the AC power cord to a nearby AC power socket (100 -

240 VAC, 50 - 60 Hz).

Unpacking the RJ-3050

Printer Rechargeable Li-ion

Battery

Belt clip

User’s Guide Product Safety Guide Phillips screw

General Description

1 Battery compartment

2 Battery latch

3 Mini-USB port

4 DC connector

5 Cover open lever

6 RD Roll compartment cover

7 Paper outlet

8 Battery indicator

9 STATUS indicator

10 POWER indicator

11 (Power) button

(To turn the printer on/off)

12 (Feed) button

(To feed the paper or print the

printer settings)

13 Wi-Fi button

14 Wi-Fi indicator

15 Bluetooth button

(To communicate with your

Bluetooth-equipped

computer/adapter or your

network access point/router)

16 Bluetooth indicator

English

Thank you for purchasing the Brother RJ-3050 mobile printer.

Read the included User’s Guide and Product Safety Guide, before using the

printer. For detailed operation instructions, see the Online User's Guide (Brother

Solutions Center at http://support.brother.com/). We suggest that you keep

these documents in a handy place for future reference. To download the latest

manuals, please visit the Brother Solutions Center (http://support.brother.com/),

where you can also download the latest drivers and utilities for your printer, read

FAQs and troubleshooting tips or learn about special printing solutions.

Printed in China

LBD536001

RJ-3050

User’s Guide

Using the Rechargeable Li-ion Battery

Turning the Printer On or Off

NOTE

Do NOT remove the battery or power to turn off the printer until the

STATUS indicator goes off .

Recharging the Li-ion Battery

1 AC adapter

2 AC power cord

Summary of content (4 pages)

PAGE 1
Using the Rechargeable Li-ion Battery Installing the Rechargeable Li-ion Battery 1. Make sure that the battery latch is lifted up, and then insert the battery into the battery compartment with the battery cover attached to the battery. Make sure that the terminal end of the battery is facing inward. RJ-3050 User’s Guide English Thank you for purchasing the Brother RJ-3050 mobile printer. Read the included User’s Guide and Product Safety Guide, before using the printer.
PAGE 2
Connecting to a DC Power Socket (Optional) 3. Connect the printer to your vehicle’s 12 V DC power socket (cigarette lighter, etc.) to charge the rechargeable battery. 1. 2. While lifting up the roll guide adjustment lever (1), push in both roll guides (2) to the roll width. Make sure that RD Roll is positioned straight in the RD Roll compartment. Connect the car adapter to the vehicle’s 12 V DC power socket. Connect the car adapter to the printer. 1 1 4.
PAGE 3
Attaching the Belt Clip LED Indicators When using the printer outside the office, you can attach the included belt clip to the printer and secure the belt clip to your belt. = Indicator is lit 1. = Indicator is blinking = Indicator blinks 1 or 2 times in each colour, then turns off = Indicator is lit or blinking in any colour or pattern = Indicator is off Secure the Phillips-head screws to the rear of the printer as shown. 2 1 (off) Example: G 1 2 2.
PAGE 4
Description (Battery) O Battery needs recharging (Once every second) O Rechargeable battery power: low (Twice every 4 seconds) O Rechargeable battery power: half (Once every 4 seconds) O Charging (off) Rechargeable battery power: full Charging complete Maintaining the Printer Maintenance of the printer may be carried out as required. However, some environments may require that maintenance must be done more frequently (e.g. in dusty conditions).