User Manual
Table Of Contents
- Online User’s Guide RJ-3050/RJ-3150
- Introduction
- IMPORTANT NOTE
- Table of Contents
- Basic Operations
- 1 Setting Up the Printer
- General Description
- Using the Rechargeable Li-ion Battery
- Recharging the Rechargeable Li-ion Battery
- While Installed in the Printer
- Connecting to an AC Power Socket (Optional)
- Connecting to a DC Power Socket (Optional)
- Using the Battery Charger (Optional)
- Using the Cradle (Optional)
- Stopping Rechargeable Li-ion Battery Charging
- Tips on Using the Rechargeable Li-ion Battery
- Installing the Clock Battery (RJ-3150 Only)
- Turning the Printer On or Off
- Setting the RD Roll
- Removing the RD Roll
- Attaching the Belt Clip
- Installing the Printer Driver and the Software
- Uninstalling the Printer Driver
- Connecting the Computer and Printer
- LCD Display (RJ-3150 Only)
- 2 Using the Printer
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Printing Labels Using P-touch Template (RJ-3150 Only)
- 6 Maintaining the Printer
- 7 Reference
- 8 Troubleshooting
- 9 Technical Information
- 1 Setting Up the Printer
- Software
- 10 How to Use P-touch Editor
- 11 How to Use P-touch Transfer Manager & P-touch Library
- 12 Transferring Label Templates with P-touch Transfer Express
- Preparing P-touch Transfer Express
- Transferring the Label Template to P-Touch Transfer Manager
- Saving the Label Template as a Transfer Package File (.pdz)
- Distributing the Transfer Package File (.pdz) and P-Touch Transfer Express to the User
- Transferring the Transfer Package File (.pdz) to Brother Printer
- How to update P-touch Software
- Wireless network
- 14 Introduction
- 15 Changing Your Printer’s Network Settings
- 16 Configuring Your Printer for a Wireless Network
- 17 Web Based Management
- 18 Troubleshooting
- 19 Appendix A
- 20 Appendix B
- 21 Appendix C
90
4
4
Mass Storage 4
Description 4
The mass storage feature allows you to execute commands and perform JPEG printing by sending data from
a computer or other device to the printer via USB. Files that have been copied to the printer’s mass storage
area are processed when you press the (Bluetooth) button (for RJ-3050) or the OK button (for RJ-3150).
This feature is useful in the following situations:
When you want to apply settings that are stored in a command file (“.bin” format), or templates that are
stored in “.blf” format files that were distributed by the administrator without using a customised tool
When you want to execute commands or perform JPEG printing without installing the printer driver
When you want to use a device with an OS (including non-Windows operating systems) that has a USB
host feature to print and transmit data
Using the Mass Storage Feature 4
a Confirm that the printer is turned off.
b While pressing the (Bluetooth) button (for RJ-3050) or the OK button (for RJ-3150), press and hold the
(Power) button.
The printer starts up in mass storage mode. For RJ-3050, the POWER and STATUS indicators light in
green. For RJ-3150, the message [Mass Storage] is displayed on the LCD display.
c Connect the computer or device to the printer via USB.
The printer’s mass storage area is displayed on the computer or device’s screen.
Note
If the mass storage area is not displayed automatically, refer to the operating instructions for the computer
or device’s operating system for information about displaying the mass storage area.
d Drag and drop the file you want to copy to the mass storage area.
e Press the (Bluetooth) button (for RJ-3050) or the OK button (for RJ-3150).
The command file is executed.
For RJ-3050, the Bluetooth indicator lights in blue. For RJ-3150, the message [Receiving] is displayed
on the LCD display.
f After the file has been executed, the Bluetooth indicator turns off (for RJ-3050) or the message [Mass
Storage] is displayed again on the LCD display (for RJ-3150).
Other Functions 4