users manual
Table Of Contents
- Basic User's Guide MFC-J6530DW/MFC-J6730DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
• Change the LAN cable for a new one.
• Use a different LAN port on your hub.
• Make sure your machine's wired connection is on.
For a wireless network connection:
• Confirm your machine's wireless status on the LCD.
Your machine is not connected to the wireless access point. Set up the wireless
network connection.
The wireless connection setting is disabled. Enable the WLAN connection and
set up the wireless network connection.
The wireless access point cannot be detected. Set up the wireless network
connection again.
The wireless network is connected. A three-level indicator in the LCD displays
the current wireless signal strength.
You can configure wireless settings by pressing the wireless status button.
If you cannot print on both sides of paper, check the following:
6
Change the paper size setting in the printer driver to Letter.
48