User Manual
58 InitialStichbyPacesetter
InstructionManual
4 Adjust any of the other settings. Refer to the related procedures for
more information.
5 Click Apply.
Specifying the Underlay Density
You can specify the density for underlay stitches.
To set the underlay density:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want to use:
Contour, Parallel, or Zig-Zag.
4 In the Density box, enter a density value.
5 Adjust any of the other settings. Refer to the related procedures for
more information.
6 Click Apply.
Specifying the Underlay Stitch Length
You can specify the stitch length for your underlay stitches. You can
increase or decrease the length according to your underlay needs.
To specify the underlay stitch length:
1 Select the segment.
2 In the Properties Panel, scroll down to the Underlay area.
3 Select one or more of the following underlay types you want to use:
Contour, Parallel, or Zig-Zag.
4 In the Stitch Length box, enter the stitch length that you want for
your underlay stitches.
5 Adjust any of the other settings. Refer to the related procedures for
more information.
6 Click Apply.
When you select underlay types, you will be able to see what
your underlay type will look like in the Preview area.