Product Safety Guide

Safe Operation for Replacing the Blade

■ Removing

a Twist off the holder cap to remove it.

b Stick the blade straight into the rubber area on

the back of the included spatula.

a Rubber area

c Pull up the holder to leave the blade in the

rubber area.

■ Installing

a Grasp the shaft of the new blade, and then

insert it into the blade slot in the end of the

holder.

The blade shaft is held in place by a magnet in the

holder. Slowly insert the blade shaft, and then slowly

release it after the shaft snaps into place against the

magnet.

b Twist on the holder cap to attach it to the

holder.

Fully tighten the cap until it can no longer be turned.

CAUTION

Sharp edge of the blade

Do not touch the blade with your hands or fingers. Otherwise, injuries may result.

Do not touch the blade with your hands or fingers. Otherwise, injuries may result. When replacing the

blade, be sure to follow the replacement procedure.

IMPORTANT

Do not use a broken blade. Otherwise, cutting cannot be performed correctly. If the blade breaks,

remove the broken piece of blade from the cut material. When removing the broken piece of blade from

the cut material, use tweezers; do not touch it with your fingers.