Instruction Manual for Stamp Starter Kit

4
f Peel the stamp sheet off the mat, and then check that the
test pattern has been cut out.
g Touch the "Start" key to start cutting the stamp pattern.
hPeel the backing from the cut-out stamp sheet.
i After flipping over the cut-out stamp sheet, place it on the
acrylic block, arranging the pattern with the grid on the
block as a guide.
Note
• When placing characters or non-symmetrical patterns on
the acrylic block, be sure to flip them over before placing
them on the block.
j Using the ink, color the stamp pattern.
k Apply the stamp at the desired location.
Note
• After use, wipe off the ink on the cut-out stamp sheet and
acrylic block with a damp cloth or tissue, and then store
them after they have dried.
• When the leftover stamp sheet is used, it may curl up in the
machine. After cutting out the pattern, use scissors to cut
around the pattern to clean it up.