Operation Manual

Utility stitches

■ Decorative stitches

Use monogramming foot “N”.

The twin needle can only be used with satin stitch . In

addition, be sure to attach zigzag foot “J” when using the

twin needle.

Overcasting Stitches

Sew overcasting stitches along the edges of cut fabric to

prevent them from fraying.

■ Using overcasting foot “G”

Attach overcasting foot “G”.

Select a stitch.

• For details, refer to “Stitch Chart” on page 35.

Position the fabric with the edge of the fabric against

the guide of the presser foot, and then lower the

presser foot lever.

Decorative stitches

5-01 5-02 5-03 5-04 5-05 5-06 5-07

5-08 5-09 5-10 5-11 5-12 5-13 5-14

5-15 5-16

Decorative satin stitches

6-01 6-02 6-03 6-04 6-05

Satin stitches

7-01 7-02 7-03 7-04 7-05

Cross stitch stitches

8-01 8-02 8-03 8-04 8-05

Utility stitches

CAUTION

• Before replacing the presser foot, be sure to

press (Presser foot/Needle exchange key)

on the operation panel to lock all keys and

buttons, otherwise injuries may occur if the

“Start/Stop” button or any other button is

pressed and the machine starts. For details on

changing the presser foot, refer to “Replacing

the Presser Foot” on page 23.

No. 1-13 1-14 1-15

Stitch

CAUTION

• When using overcasting foot “G”, be sure

select a stitch that can be used with

overcasting foot “G”. If you sew with the

incorrect stitch, the needle may hit the presser

foot, bending the needle or damaging the

presser foot.

1 Guide