Operation Manual
Table Of Contents
- USER’S GUIDE
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialling options
- 8 Remote Fax Options (FAX-T104 only)
- 9 Message Manager (FAX-T106 only)
- Message Manager Mode
- Setting Up Message Manager
- Setting up voice store
- Setting Fax Forward/Fax Storage
- Recording the Message Manager’s Outgoing Message (TAD MESSAGE)
- Activating Message Manager Mode
- Message Indicator
- Playing Voice Messages
- Printing a Fax Message
- Backup Printing Option
- Erasing Messages
- Setting the maximum time for incoming messages
- Setting the Toll Saver
- ICM Recording Monitor
- Recording a Conversation
- Remote Retrieval
- Message Manager Mode
- 10 Printing reports
- 11 Making copies
- 12 Important information
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Accessory List
5 - 2
Setup Receive
To select or change your Receive Mode
1
Press Receive Mode.
The LCD shows your current selection.
The options on FAX-T104 are:
The options on FAX-T106 are:
Or, if TAD Mode is switched
ON by pressing (Digital
TAD button), it overrides your
Receive Mode setting, so the display shows:
2
Continue to press Receive Mode until your new selection
appears. After 2 seconds, the screen returns to the date and
time display, along with your new Receive Mode setting.
Setting the Ring Delay
The Ring Delay sets the number of times the fax machine rings
before it answers in FAX ONLY or FAX/TEL and TAD:MSG MGR
modes. (FAX-T106 only)
1
Press Menu/Set, 2, 1.
If you have a FAX-T104, go to Step 3.
2
Press ▲ or ▼ to select RING DELAY, and press Menu/Set.
3
Press ▲ or ▼ to select how many times the line rings before
the machine answers, and press Menu/Set.
4
Press Stop/Exit.
If you are changing the Receive Mode while in another
operation, the screen returns to the current operation display.
(FAX-T106 only)
Toll Saver must be OFF to use the Ring Delay setting.
09/0615:25FAX
Current Receive Mode
MNL: MANUAL
FAX: FAX ONLY
F/T: FAX/TEL
TAD:ANSWER MACH.
(FAX-T104 only)
TAD:MSG MGR
(FAX-T106 only)
FAX ONLY
FAX/TEL
TAD:ANSWER MACH.
MANUAL
FAX ONLY
FAX/TEL
MANUAL
TAD:MSG MGR