Operation Manual

5 - 6
Setup Receive
Advanced receiving operations
Operation from extension telephones
If you answer a fax call on an extension telephone, or an external
telephone into the correct socket on the machine, you can make
the fax machine take the call by using the Fax Receive Code.
When you press the Fax Receive Code 5 1, the fax machine
starts to receive a fax. (See Fax Detect on page 5-4.)
If the fax machine answers a voice call and pseudo/double-rings
for you to take over, use the Telephone Answer Code # 5 1 to take
the call at an extension phone.
(See Setting the F/T Ring Time (FAX/TEL mode only) on page
5-3.)
If you answer a call and no one is on the line, you should assume
that you’re receiving a manual fax.
■ At an extension phone (on a separate telephone wall socket),
press 5 1, wait for fax-receiving tones (chirps), and then
hang up.
■ At an external phone (connected to the correct socket on the
machine), press 5 1 and wait for the phone to be
disconnected before you hang up (the LCD shows RECEIVE).
Your caller will have to press the Start key to send the fax.
For FAX/TEL mode only
When the fax machine is in FAX/TEL mode, it will use the F/T Ring
Time (pseudo/double-ringing) to alert you to pick up a voice call.
If you’re at an extension or external phone, you’ll need to lift the
handset during the F/T Ring Time and then press # 5 1 between
the double rings. If no one is on the line, or if someone wants to
send you a fax, send the call back to the fax machine by pressing
5 1.
Remote Call Transfer
In order to use this feature, you should first set REMOTE CODE to
ON. (See Changing the remote codes on page 5-7.)
You can use the Remote Call Transfer feature to transfer a voice
call received on a remote DECT cordless phone externally
connected to the fax machine. (See Connecting an external
telephone on page 1-9.) You can transfer an incoming voice call to
your fax machine, but you cannot transfer a call from your fax
machine to your DECT phone.