Operation Manual
Table Of Contents
- USER’S GUIDE
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Paper
- 3 On-Screen Programming
- 4 Initial Setup
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialling options
- 8 Remote Fax Options (FAX-T104 only)
- 9 Message Manager (FAX-T106 only)
- Message Manager Mode
- Setting Up Message Manager
- Setting up voice store
- Setting Fax Forward/Fax Storage
- Recording the Message Manager’s Outgoing Message (TAD MESSAGE)
- Activating Message Manager Mode
- Message Indicator
- Playing Voice Messages
- Printing a Fax Message
- Backup Printing Option
- Erasing Messages
- Setting the maximum time for incoming messages
- Setting the Toll Saver
- ICM Recording Monitor
- Recording a Conversation
- Remote Retrieval
- Message Manager Mode
- 10 Printing reports
- 11 Making copies
- 12 Important information
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Accessory List
Quick-Dial numbers and dialling options
7 - 7
Redial (Telephone)
If you are calling someone and the line is busy, you can retry the
number by pressing Redial/Pause.
1
Pick up the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
2
Press Redial/Pause.
3
To hang up, replace the handset.
—OR—
Press Speaker Phone (FAX-T106 only).
Redial (Fax)
If you’re sending a fax manually and the line is busy, press
Redial/Pause to try again. Any time you want to make a second
call to the last number dialled, press Redial/Pause to save time.
If you’re sending a fax automatically and the line is busy, the fax
machine will automatically redial three times at five minutes
intervals after the transmission.
Tone or Pulse
If you have a Pulse dialling service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below.
If you have Touch Tone service, you will not need this feature to
send tone signals.
1
Pick up the handset.
2
Press #. Any digits dialled after this will send tone signals.
3
When you hang up, the fax machine will return to the Pulse
dialling service.