User Manual
Table Of Contents
- USER’S GUIDE TD-2020 TD-2120N TD-2130N
- Introduction
- Table of Contents
- 1 Getting Started
- 2 Printing
- 3 Printer Setting Tool
- 4 Other Functions
- 5 Maintaining the Printer
- 6 Indicators
- 7 Troubleshooting
- 8 Specifications
- 9 Using the RJ25 to DB9M Serial Adapter (Optional:PA-SCA-001)
- 10 Using the Touch Panel Display (Optional:PA-TDU-001) (TD-2120N/2130N only)
- General Description
- LCD
- Touch Panel
- Printing With the Touch Panel Display
- Touch Panel Display Settings
- Creating a Label Layout
- Transferring the Label Layout to the Printer
- Printing the Label
- Label Layouts on the Printer (Checking, Deleting and Log)
- Replacing the Time/Date Battery
- Frequently Asked Questions
- Product Specifications
- 11 Using the WLAN Interface (Optional:PA-WI-001) (TD-2120N/2130N only)
- 12 Using the Bluetooth Interface (Optional:PA-BI-001) (TD-2120N/2130N only)
- 13 Using the Label Peeler (Optional:PA-LP-001) (TD-2120N/2130N only)
- 14 Using the Rechargeable Li-ion Battery/Battery Base (Optional:PA-BT-4000LI/PA-BB- 001) (TD-2120N/2130N only)
- brother UK ENG
Printing
21
2
Connecting the
Computer and Printer
2
The printer can be connected to your
computer using any of the methods listed
below.
USB cable connection
Wired LAN connection (TD-2120N/2130N
only)
Serial cable connection
Wireless LAN connection
(TD-2120N/2130N only)
Bluetooth connection (TD-2120N/2130N
only)
For details on connecting with the serial
cable, see Connecting the Computer and
Printer With the RJ25 to DB9M Serial Adapter
on page 68.
For details on connecting with a wireless
LAN, see Connecting the Computer and
Printer by Wireless LAN on page 102.
For details on connecting with Bluetooth, see
Connecting the Computer and Printer by
Bluetooth on page 104.
USB Cable Connection 2
a Before connecting the USB cable, make
sure that the printer is turned off.
b Connect the printer end of the USB
cable to the mini-USB port on the back
of the printer.
c Connect the other end of the USB cable
to the USB port on the computer.
d Turn on the printer.
Wired LAN Connection
(TD-2120N/2130N only) 2
a Before connecting the LAN cable, make
sure that the printer is turned off.
Before connecting the printer to the
computer, install the printer driver.
In order for the printer to use a static IP
address to communicate through a
wired LAN connection, the printer driver
and “Printer Setting Tool” must first be
installed, and the wired LAN connection
settings must be specified. For details,
see Installing the Printer Driver and
Software on page 4.