User Manual
Table Of Contents
- User's Guide TD-4410D/TD-4420DN
- Table of Contents
- Before You Use Your Brother Machine
- Set Up Your Printer
- Install Software
- Create Labels and Print Using Computer
- Print Labels Using Mobile Devices
- Transfer Templates to the Printer (P-touch Transfer Manager) (Windows)
- Transfer Templates to the Printer Using P-touch Transfer Manager (Windows)
- Distribute Templates to be Transferred to Users Without Using P-touch Transfer Manager (Windows)
- Store or Manage Templates (P-touch Library)
- Network
- Update
- Printer Settings
- Routine Maintenance
- Troubleshooting
- Appendix
Home > Troubleshooting > Reset the Printer
Reset the Printer
Reset the internal memory of your printer to clear all the saved label files, or if the printer is not operating
correctly.
>> Reset All Settings to the Factory Settings Using the Printer Buttons
>> Reset Data Using the Printer Setting Tool
Reset All Settings to the Factory Settings Using the Printer Buttons
1. Turn off the printer.
2. Press and hold and for about three seconds.
All LED indicators flash in red.
3. Continue holding down
.
• (TD-4420DN) Press once to reset the network settings.
The Power LED lights in red.
• (TD-4420DN) Press
twice to reset the transferred data and the device settings.
The Roll LED lights in red.
• Press
three times to reset all the settings and device settings to the factory settings.
The Status LED lights in red.
4. Release
.
All LED indicators flash in red four times, and then light in red.
Reset Data Using the Printer Setting Tool
You can use the Printer Setting Tool from a computer to perform the following operations for the printer:
• Delete the templates and databases
• (TD-4420DN) Reset communication settings
• Reset printer settings to factory settings
Related Information
• Troubleshooting
105