Owner's Manual

Programmer
118
Chapter 3 Programming with Command Function
BAS-Programmer

F
ESC
P
M R
C
E
LI
L
0
4
5
1
2 3
6
7 8 9
?
Please read before programming
Pressing a designated combination of keys will issue a command to the programmer. These key combina-
tions are called 'command'. This chapter describes the method of programming with command.
Panel description and usage
Cancels an image display.
Lights when the feed is set.
Press this key for smoothing
or editing.
Deletes a part of the data.
Press this key to create a
line or a circle.
Press this key to start or
end a program.
"Turning power OFF"
(Refer to page 11.)
Press this key to display
the data image being
created.
Press these keys to input
numerical values.
Press this key to cancel
operation.
Press this key to input an
end code.
Press this key to set the
needle position or use this
key as a part of a command.
Press these keys to
advance steps.
Press these keys to move
the needle.