Owner's Manual

Programmer
119
Chaprter 3 Programming with Command Function
Programming flowchart
Programming
Position the sewing start position and press
L
.
Input the command for programming.
(Refer to page 161.)
Combine straight lines, curves and other figures to make patterns to the pattern
sheet. After completing each pattern, press
L
.
The data is available until deletion.
Input end code.
(Refer to page 179.)
Display screen
Press
P
and the following screen appears.
If the screen is not displayed, press
?
.
Displays the command
status.
Displays the current
needle position/total
stitch count.
Displays the input value.
Displays the stitch length.
Displays the end code, if
applicable.
Displays distance from the
previous needle position.
Displays distance from the home position.