Owner's Manual

Programmer
121
Chaprter 3 Programming with Command Function
Description of commands
Moving needle point
Proceeding by stitches
Returning by stitches
9 9 9
Proceeding to the end point
9 9 9
Returning to the first point
F
Proceeding by skipping stitches
F
Returning by skipping stitches
9 9 9
F
Skipping to the end point (not applicable at the home position)
9 9 9
F
Skipping to the first point
R
Returning the position to the home position.
Deleting data
R
2
2 2
Deleting all data.
C
Deleting data from stitches
C
Deleting data before stitches
Ending programming
E
1
1 1
Normal end
E
1
1 2
Fixing the sewing speed at 1000 spm or lower.
E
1
1 3
Not carrying out thread removal.
E
1
1 4
Setting the sewing speed at 1000 spm or lower without thread
removal.
E
1
1 5
Carrying out no thread breakage.
E
1
1 6
Fixing the sewing speed at 1500 spm or lower.