Owner's Manual

Programmer
137
Chaprter 3 Programming with Command Function
4
Ending program
1. Press
P
.
Zigzag stitch
Zigzag stitch is programmed. The example in the left
is used for explanation of even width of zigzag stitch
on the sewing path.
Zigzag with curves may be programmed.
1
Programming
1. Press
P
.
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with . Press
L
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Press
7
3 0
and press
M
.
7
is the command for the zigzag stitch. Input the
width of the zigzag stitch in
. 3.0 mm is input in the
example.
4. Input the stitch length and press
M
.
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Move the work clamp with . Press
L
7
8 9
when the needle point is at
point B of the pattern.
Zigzag stitch with even width to the left and the right is
programmed.
Zigzag width
Stitch
length