Owner's Manual

Chaprter 3 Programming with Command Function
Programmer
143
2
Resizing
1. Move the needle to the reference point of
resizing with
.
The pattern is resized to the home position if the needle is not
moved.
2. Press
8
8 8
and press
M
.
Input the resizing command.
3. Press
1
5 0
and press
F
.
Input the resizing percentage for the X axis. Specify the
magnification percentage by 3 digits in
. 150%
is specified in the example.
4. Press
1
5 0
and press
M
.
Input the resizing percentage for the Y axis. Specify the
magnification percentage by 3 digits in
. 150%
is specified in the example.
5. Input the stitch length. Press
L
.
If the stitch length is 0.0, the pattern is resized with the same
number of stitches as the original data.
3
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1. Press
P
.