Owner's Manual

Chaprter 3 Programming with Command Function
Programmer
145
4
Deleting unnecessary points
1. Press
C
.
2. Input the number of stitches to be deleted
and press
.
The example is deleting 3 stitches ahead. Press
3
.
3. The needle point moves to 6, 7 and 8. Points
5, 6 and 7 are deleted.
5
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
6
Ending program
1. Press
P
.
Deleting the first stitch
The first stitch of the programmed pattern is deleted.
The example in the left is used for explanation of
deleting 1 and setting 2 for the sewing start position.
1
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.