Owner's Manual

Programmer
146
Chapter 3 Programming with Command Function
2
Moving to position 1.
1. Press
1
and press .
The work clamp moves to the start position.
3
Deleting 1
1. Press
C
.
2. Input the number of stitches to be deleted
and press
.
The example is deleting 1 stitch ahead. Press
1
.
3. The needle point moves to 2.
4
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
5
Ending program
1. Press
P
.