Owner's Manual

Programmer
154
Chapter 3 Programming with Command Function
3
Deleting A
1. Press
C
.
2. Input the number of stitches to be deleted
and press
.
The example is deleting 1 stitch. Press
1
.
3. The needle point moves to 1.
4
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
5
Ending program
1. Press
P
.
Moving the pattern in parallel 1
The program data is moved in parallel. The example
in the left is used for explanation of moving the
pattern in parallel when the first stitch is the sewing
start position.
1
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.