Owner's Manual

Chaprter 3 Programming with Command Function
Programmer
155
2
Moving in parallel
1. Move the work clamp with . Press
L
when the needle point is at A of the
pattern.
3
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
4
Ending program
1. Press
P
.
Moving the pattern in parallel 2
The program data is moved in parallel. The example
in the left is used for explanation of moving the
pattern in parallel when the first stitch is the escape
point.
1
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
2
Moving
1. Press
2
and press .
The needle point moves to point A.