Owner's Manual

Programmer
15
Chapter 1 Preparations of operation
Restricted functions A Series (2DD) E Series(2HD) Commmands
Resolution 0.1mm/pulse 0.05mm/pulse
Low-speed 2 options: 4 options:
L
6
6 8
sewing 400 and 1200 spm 400, 600, 800, 1200 spm
L
6
6 9
Split function in
No Yes
L
2
2 0
sewing
L
2
3 0
Stoppage of split
No Yes
L
2
2 1
L
2
3 1
Extended option
No Yes
output
Notes for programming
Pattern sheet
Use thin plotting paper or prepare copies of pattern sheet.
The pattern sheet is designed in the original scale. Adjust the size to magnification (2,
5, or 10) for magnified input.
Stitch length
Setting range between 0.3 and 12.7 mm is available.
Stitch count
Maximum available count is 20,000.
Available types of floppy disk
(*1) As shown in the table, four types of data are available for writing. Data written into 2HD and 2DD
disks are automatically converted to BAS300E and former BAS300A data respectively.
(*2) TFD data is converted to BAS300E data by the programmer and becomes available for sewing.
(*3) Restrictions for 2DD floppy disks
The use of following functions added to the E series are restricted to maintain the compatibility with
former BAS300A data.
with the needle
at the lower end
)1*(epytataDyromemroftnuochctitSnoituloserataDksiDtamroFetirW
ataDE003SAB
nrettap/sehctits00002
snrettap001
000,063otpU:latoT
sehctits
eslup/mm50.0
DH2
V/SOD
M44.1
elbaliavA
)2*(atadyrediorbmeDFT
)ZSD,BSD,TSD(
nrettap/sehctits00005eslup/mm1.0
toN
elbaliava
atadA003SAramroF
nrettap/sehctits0004
snrettap01
sehctits000,04otpU:latoT
eslup/mm1.0
)3*(DD2
dettamroF
.yllacitamotua
elbaliavA
atad003SABramroF
nrettap/sehctits0002
snrettap01
sehctits000,02otpU:latoT
eslup/mm2.0
toN
elbaliava