Owner's Manual

Programmer
176
Chapter 3 Programming with Command Function
3. Move the needle with to select the second point, then press
L
.
4. Move the needle to the corner point and input
L
7
8
.
5. Repeat steps 3 and 4 and move the needle to the end point. Input
E
1
1
.
When the alarm sound is complete, the needle point moves to the end position.
Creating feed data
Command to be used
L
6 6 6
F
Specifying split (the separation point for different patterns in
sewing) after feed
L
7 7 7
F
Moving in parallel for the feed
L
8 8 8
F
Creating split data after basting
L
9 9 9
F
Creating basting data
1. Press
F
.
2. Determine the feed point with
.