Owner's Manual

Programmer
206
Chapter 4 Extended Option Output
Example of extended option output
To program the extended option output, prepare the timing chart. Then set the output
condition, enable/disable conditions based on the chart.
The example shows how program setting values are determined from the timing chart. No
explanation is given for the operation of the machine.
Example 1 of extended option output
Sequence 1 for stacker
This is a sequence example for removing and stacking the material as soon as the
work clamp is lifted after sewing.
Timing chart
Program setting value
Option output 4 BAR1 for holding material
Option output 5 BAR2 for moving material
Option output 6 AIR for air blow
BAR1
BAR2
AIR
1.2sec.
0.5sec. 0.7sec.
0.5sec.
Lifting of work clamp when embroidering is completed
1.7sec.
tuptuO
.oN
noitarepO
gnittes
noitidnoctuptuO
1remiT
]Sm[
2remiT
]Sm[
noitidnocelbanEO XnoitidnocelbasiD
.oNnoitidnoCnoitpircseD.oNnoitidnoCnoitpircseD.oNnoitidnoCnoitpircseD
4NO03pmalckrowfognitfiL000216
gnirediorbmE
noitelpmoc
18FFO6tuptuO
5NO67NO4tuptuO005007— — — —
6NO67NO4tuptuO0050071————