Owner's Manual

Programmer
37
Chapter 2 Programming with Help Function
3. Move the work clamp with . Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
4. Program pattern 1.
5. Press

ESCESC
after input of point B.
The number of pressing

ESCESC
depends on the programming
method for pattern 1.
When
is used for programming, press twice.
When each stitch is programmed, press once.
6. Select with and press .
7. Move the work clamp with . Press
when the needle point is at point C of the
pattern.
8. Press

ESCESC
.
9. Program pattern 2.
10. When point D is programmed, press

ESCESC
.
The number of pressing

ESCESC
depends on the programming
method for pattern 1.
When is used for programming, press twice.
When each stitch is programmed, press once.
2
Inputting the end code
1. Select with and press .
2. Select the end code type with
and
press
.
"111" is selected in the example. Press and the work clamp
returns to the first stitch(point A).
3. Press

ESCESC
.
The work clamp returns to the home position.
Pattern 2
Pattern 1