Owner's Manual

Programmer
42
Chapter 2 Programming with Help Function
5. When point B is programmed, press

ESCESC
.
The number of pressing

ESCESC
depends on the programming
method.
2
Selecting the symmetrical pattern type
1. Select with and press .
2. Select the symmetrical pattern type and
press
.
(symmetric to Y axis) is selected in the example.
3. Input the number of feed boundaries to be
ignored and press
.
Refer to "Editing the current data" (page 98) for details.
4. The needle point moves slowly from point B
to point A in the right half and it is
automatically programmed. Press
to
make fast movement.
5. Press

ESCESC
twice.
3
Inputting the end code
1. Select with and press .
2. Select the end code type with
and
press
.
"111" is selected in the example. Press and the work clamp
returns to the first stitch(point A).
3. Press

ESCESC
.
The work clamp returns to the home position.