Owner's Manual

Programmer
93
Chapter 2 Programming with Help Function
Creating basting data
Create basting data.
1. Select
and press .
2. Move the needle with , then press .
Creating split data
Specify breakpoints for sewing a series of different patterns.
1. Select
and press .
2. Use to specify whether to stop the needle at the lower end or not,
then press
.
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
ON: The needle stops at the lower end.
Thread breakage is not carried on.
OFF: The needle stops at the upper end.
Thread breakage is carried on.