Brochure

125
Table No. 1 Bushing Specifications
R1 - 1 1/8, R1 1 3/16, R2 1 3/8, S1 1 11/16, S1 1 3/4 and S2 1 7/8” to 2 1/8” Bushings are steel. U0 and U1 2 3/8” to 3 3/16” and U2 2 7/16” to 3 3/16” are cast iron.
“W” and “Y” Bushings are cast iron. All other Bushings on this page are either sintered steel, malleable iron or ductile iron.
Contact Factory for clarification. *Y Bushings are made-to-order.
Note: Taper on all Browning Split Bushings is 3/4“ per foot on diameter.
Type1Bushings
Type2Bushings
TYPE 1 TYPE 2 TYPE 1 TYPE 2
“G” & “H” BUSHINGS “S” & “U” BUSHINGS
“P”, “B”, “Q”, & “R” BUSHINGS “W” & “Y” BUSHINGS
TYPE 1 TYPE 2 TYPE 1 TYPE 2
Split Taper Bushings
Part
No
Dimensions
Bore Range Cap Screws
Av.
Wt.
Lbs.
Wrench
Torque
In-Lbs.
L U T
D
H V W X Y R S Type 1 Type 2 No. Size
Large
End
Small
End
G 1” 1/4” 3/4” 1.172” 1.133” 2” 1 9/16” - 5/8” 3/16” 1/8” 3/16” 3/8” - 15/16” 1” 2 1/4 x 5/8”
.5 95
H 1 1/4 1/4 1 1.625 1.570 2 1/2 2 - 7/8 3/16 1/8 3/16 3/8-1 3/8 1 7/16-1 1/2 2 1/4 x 3/4
.8 95
P1 1 15/16 13/32 1 17/32 1.9375 108555 3 2 7/16 3/8” 15/16 7/32 7/32 1/4 1/2 - 1 7/16 1 1/2 - 1 3/4 3 5/16 x 1
1.3 192
P2 2 15/16 13/32 2 17/32 1.9375 1.7930 3 2 7/16 3/8 2 5/16 7/32 7/32 1/4 3/4 - 1 7/16 1 1/2 - 1 3/4 3 5/16 x 1
1.5 192
P3 4 7/16 13/32 4 1/32 1.9375 1.6993 3 2 7/16 3/8 3 13/16 7/32 7/32 1/4 1 1/8- 13/8 1 5/8 3 5/16 x 1
2 192
B 1 15/16 1/2 17/16 2.625 2.5567 3 11/16 3 1/8 1/2 13/16 7/32 1/4 1/4 1/2- 1 15/16 2 - 2 7/16 3 5/16 x 1 1/4
1.8 192
Q1 2 1/2 17/32 131/32 2.875 2.7657 4 1/8 3 3/8 1/2 13/4 7/32 7/32 9/32 3/4- 2 1/16 2 1/8 - 2 11/16 3 3/8 x 1 1/4
3.5 348
Q2 3 1/2 17/32 2 31/32 2.875 2.7032 4 1/8 3 3/8 1/2 23/4 7/32 7/32 9/32 1 - 2 1/16 2 1/8 - 2 5/8 3 3/8 x 1 1/4
4.5 348
Q3 5 17/32 4 15/32 2.875 2.6094 4 1/8 3 3/8 1/2 4 1/4 7/32 7/32 9/32 1 3/8 - 1/16 2 1/8 -2 1/2 3 3/8 x 1 3/4
5.5 348
R1 2 7/8 5/8 2 1/4 2.875 3.8750 5 3/8 4 5/8 3/4 2 1/4 1/4 9/32 1 1/8 - 2 13/16 2 7/8 - 3 3/4 3 3/8 x 1 3/4
7.5 348
R2 4 7/8 5/8 4 1/4 4.000 3.7500 5 3/8 4 5/8 3/4 4 1/4 1/4 9/32 1 3/8 - 2 13/16 2 7/8 - 3 5/8 3 3/8 x 1 3/4
11 348
S1 4 3/8 3/4 3 5/8 4.000 4.4180 6 3/8 5 3/8 3/4 3 5/16 5/16 5/16 3/8 1 11/16 - 3 3/16 3 1/4 - 4 1/4 3 1/2 x 2 1/4
13.5 840
S2 6 3/4 3/4 6 4.625 4.2696 6 3/8 5 3/8 3/4 5 11/16 5/16 5/16 3/8 1 7/16 - 3 3/16 3 1/4 - 4 3/16 3 1/2 x 2 1/4
19 840
U0 4 15/16 3/4 4 3/16 6.000 5.7656 8 3/8 7 1 1/4 3 3/4 7/16 7/16 15/32 2 3/8 - 4 1/4 4 3/8 - 5 1/2 3 5/8 x 2 3/4
27 1680
U1 7 1/8 11/16 6 1/16 6.000 5.6485 8 3/8 7 1 1/4 5 5/8 7/16 7/16 15/32 2 3/8 - 4 1/4 4 3/8 - 5 1/2 3 5/8 x 2 3/4
40 1680
U2 10 1/8 11/16 9 1/16 6.000 5.4610 8 3/8 7 1 1/4 8 5/8 7/16 7/16 15/32 2 7/16- 4 1/4 4 3/8 - 5 3 5/8 x 2 3/4
50 1680
W1 8 1/4 17/16 6 13/16 6.000 8.1016 12 1/2 10 1 1/4 6 3/8 7/16 7/16 9/16 3 3/8 - 6 3/16 6 1/4 - 7 7/16 4 3/4 x 3
104 3000
W2 11 1/4 17/16 9 13/16 8.500 7.9141 12 1/2 10 1 1/4 9 3/8 7/16 7/16 9/16 3 3/8 - 6 3/16 6 1/4 - 7 7/16 4 3/4 x 3
133 3000
Y0* 11 1/8 2 9 1/8 8.500 11.4688 16 1/2 14 1/2 2 8 1/2 5/8 5/8 5/8 6 - 7 15/16 8 - 10 4 1 x 5
270 7200