Manual

open, push the cartridge stop button,
making sure your fingers are clear of the
ejection port.
Push the “safety” from left to right or to
the “on safe” position. The red band
indicating that the B - 80 is ready to fire
should not show.
Insert cartridge of the proper gauge
through the loading port at the bottom of
the receiver up into the magazine as
shown in Figure 12. Make sure the
cartridge is pushed past the cartridge stop
and that the carrier is free to move.
Depress the carrier release and cycle the
action by pulling the operating handle fully
to the rear and releasing it. Your chamber
is now loaded.
Repeat step four until magazine is loaded.
CAUTION: AT ALL TIMES DURING THE
UNLOADING PROCEDURE, BE SURE YOUR
MUZZLE IS POlNTlNG IN A SAFE DIRECTION
AND THE SAFETY IS “ON SAFE.”
30