Manual

separately from the gun beyond the reach of
children.
To change loads in your B
- 80, simply eject the
chambered cartridge by pulling the operating
handle all the way to the rear. Insert the desired
cartridge (such as a goose load) of the same
gauge through the ejection port into the chamber.
CAUTION: Repeated cycling of the bolt’s
operating handle alone is not assurance that the
B
- 80 is unloaded. There still may be cartridges in
the magazine.
ALWAYS CONDUCT A THOROUGH
VISUAL INSPECTION OF THE CHAMBER,
ACTION AND MAGAZINE AFTER UNLOADING.
The correct procedure for cleaning your B - 80 is
as follows:
BE CETAIN YOUR SHOTGUN’S MAGAZINE
AND CHAMBER ARE UNLOADED AND WEAR
EYE PROTECTION.
Dismount barrel so that it can be cleaned
from the breech end.
Inspect bore from both ends for leading by
looking through bore toward light. NOTE:
Dull longitudinal streaks, usually more
32