Manual

making sure to wipe gun clean of all finger
marks.
The wood surfaces can also be wiped with
Browning Gun Oil or they can be polished
with any quality furniture wax (but not
both).
Once a year, or after 1000 shots, it is advisable
to soak the gas piston in solvent and scrub it
with a brass
- wire brush to remove accumulated
deposits. The gas cylinder and barrel guide
should also be thoroughly cleaned and wiped
dry. Do not oil. If at any time your B
- 80 should
fail to eject, thoroughly clean the gas system
before seeking the services of a competent
gunsmith.
The trigger and bolt assembly should be
removed from the receiver as described on page
35, and thoroughly cleaned with nitro solvent
and a toothbrush. Wipe the parts dry and
lubricate with a few drops of high grade oil
before reassembly.
34