User Guide

NOTE: WHEN CLEANING THE BAR WITH THE BOSS
®
REMOVED, THE PLASTIC CAP
(CROWN AND ACCURACY PRESERVER) PROVIDED WITH THE RIFLE SHOULD ALWAYS
BE USED TO PROTECT THE MUZZLE’S CROWN. ALWAYS MAKE SURE THE CAP USED
MATCHES THE CALIBER OF THE RIFLE BEING CLEANED. THE CALIBER IS MARKED ON
THE END OF THE CAP.
Clean the BOSS® by unscrewing the body and micro-adjustable lock
nut from the rifle. With the components disassembled, wipe each
component with oil. Browning oil is excellent for this application.
Lightly oil all threads and make sure the exhaust holes are free of
obstructions.
REMEMBER TO REMOVE THE PLASTIC CAP WHEN REASSEMBLING THE BOSS
®
ON THE BAR.
4 Reassemble your BOSS® by screwing on the micro-adjustable lock
nut and then the BOSS® body. After taking apart the BOSS®, it will
be necessary to reset the Sweet Spot.
MAKE CERTAIN ALL CLEANING PATCHES ARE REMOVED FROM THE BARREL
AND EXHAUST HOLES IN THE BODY OF THE BOSS
®
BEFORE FIRING YOUR RIFLE.
5 After cleaning the bore, it is recommended two fouling shots be
fired when firing for extreme accuracy. Additionally, it is
recommended the rifle be allowed to cool every three rounds.
12
02380-BFA_BOSSOMdoc 8/7/03 9:22 AM Page 12