Owner's Manual

order to introduce the barrel

extension into the receiver, the

carrier must be lowered. To

effectively lower the carrier, the

forearm must be moved com-

pletely to the rear first. Then, the

forearm must be partially moved

forward (as detailed in Step 2)

so that the barrel extension will

not bind against the carrier. With

the ejection port downward, the

bolt will retain the carrier in a posi-

tion low enough to allow easy insertion of the barrel.

3 Before attaching the barrel, be sure to glance through the bore to be

sure it is clear of any obstructions.

4 With the forearm positioned as explained in Step 2, insert the barrel

extension into the receiver. Move the barrel rearward, guiding the

barrel guide ring over the magazine tube. The barrel tab projects

from the most rearward rib post on the top of the barrel. Be sure the

barrel tab aligns with and enters the recess in the front, upper surface

of the receiver (Figure 5). IMPORTANT: BPS GAME GUNS are

shipped with a barrel stabilizing split ring and a barrel stabilizing lock

FIGURE 6

Place the lock washer on top of the split ring.

FIGURE 5

Be sure the barrel tab aligns with and enters

the recess in the front, upper surface of the

receiver.

FIGURE 4

Push the forearm forward until the rear of the

forearm is even with the front of the receiver.

Forearm

Beveled Surface

Barrel

Barrel Stabilizing

Lock Washer

Magazine Cap

Barrel Stabilizing

Split Ring

Magazine Tube

Barrel

Guide Ring

00401BFA/BPS OM fin 8/7/03 11:17 AM Page 12