Owner's Manual

AVAILABLE 28 GAUGE INVECTOR™ TUBES:
RIM NOTCHES PATTERN WITH PATTERN WITH
LEAD SHOT STEEL SHOT
IFull Note:
2
III Modified Imp. Modified
3
IIII Imp. Cylinder Modified
3
IIIII Skeet Modified
3
No notches Cylinder Imp. Cylinder
3
AVAILABLE .410 BORE INVECTOR™ TUBES:
RIM NOTCHES PATTERN WITH PATTERN WITH
LEAD SHOT STEEL SHOT
IFull Note:
2
III Modified Imp. Modified
3
IIII Imp. Cylinder Modified
3
IIIII Skeet Skeet
1
Extra Full Special with knurled rim. Do not use with steel shot.
2
Not for use with steel shot. Using an over-tight choke constriction with steel shot
will result in an ineffective, “blown pattern.”
3
When more than one choke designation is listed for a given steel shot pattern, use
the more open choke listed for high velocity, larger size steel shot loads.
4
Has knurled extension beyond muzzle.
USE OF EXTRA BARRELS
Extra barrels are available for your particular BPS model. You can
change lengths or adapt to the newer, backbored, Invector-Plus barrels.
Be certain to specify which BPS model, gauge, and chambering you
have when ordering extra barrels.
WARNING: YOU CANNOT FIT A 12 GAUGE, 3 1/2" CHAMBERED BARREL
TO A 12 GAUGE, 3" CHAMBERED RECEIVER, AND VICE-VERSA.
22
00401BFA/BPS OM fin 8/7/03 11:17 AM Page 22