Instruction Manual

WWW.BROWNINGTRAILCAMERAS.COM
8 9
BROWNING TRAIL CAMERAS
CAMERA SETTINGS INFORMATION
Date/Time: The day, month, year and time can be set here.
OPERATION MODE
Trail Cam: This setting will take still pictures of game in daylight
and nighttime. This is the most widely used setting and works
well for trails and feeding areas.
Video: This setting will take video clips of game in daytime and
nighttime. Full HD video clips will be stored on the SD card for re-
view. The camera will upload a picture from the video clip to your
account. The entire video clip will not upload to your account.
PHOTO QUALITY
Options: Low (2MP), Medium (4MP), High (8MP), Ultra (22MP)
VIDEO QUALITY
High and Ultra are the options here, both video settings capture in
1920x1080 resolution @ 30 fps. The ULTRA setting has a lower
compression rate than the HIGH setting.
VIDEO LENGTH
Options: 5, 10, 20, 30 seconds, 1 and 2 minutes.
Notes: To conserve battery power, your night videos are limited to a
maximum time of 20 seconds regardless of the actual setting. Also,
when downloading the HD file to the app only 10 seconds of the video
can be retrieved.
PHOTO DELAY
Options: 1, 5, 10, 20, 30 seconds, 1, 5, 10, 30 and 60 minutes.
The Photo Delay setting allows you to choose how much of a
“timeout” there is between trigger events both with still pictures
or videos.
BASIC CAMERA SETUP AND OPERATION
TURNING THE CAMERA ON
When the trail camera is powered ON, the display will light up and pro-
vide the following information. Camera mode: TRAIL as a default. This
setting will take photos. The countdown delay, battery meter and num-
ber of pictures taken.
ENTERING THE SETUP MENU
From the Home Screen press the Mode Button once to enter the cam-
eras SETUP MENU.
SCROLLING THROUGH THE SETTINGS
In the Setup Menu, the camera’s Up and Down Arrow Buttons are used
to scroll through the cameras available settings. If you use the Down
Arrow Button you will scroll through the settings in the order they are
outlined in the cameras instruction manual below.
CHANGING A SETTING
To change a setting press the Enter Button; this unlocks the setting to
allow for changes. Use the cameras Arrow Buttons to scroll through
the options for that setting. Locate the new option and to select press
the Enter Button; this locks the change in and returns the camera to
the Setup Menu. Continue this process to make all changes. Once all
changes have been completed press the Mode Button to return the
camera to the Home Screen. From this point the camera can be left
powered on to start performing or it can be powered off to be used later.