Instruction Manual

QUICK CELLULAR TEST

After you have installed batteries and an Empty SD card in your

camera, set up an account at Strike Force Wireless, and finish

your subscription plan details, its time to do a test transmission.

STEP 1 -

Power ON your camera, and take a test picture by press-

ing the ENTER button. The SD card meter on your camera will

display the number of pictures taken.

STEP 2 -

On your camera navigate to the “LTE Test” option in the

settings menu, and click on ENTER button to start the test.

Your camera will make connection with a cell tower and transmit

the images to your Strike Force Wireless account. You can view

the pictures on your laptop or mobile app. Your camera screen

will display the cellular signal strength. If your camera registers

the cell tower strength low, you may need to relocate the camera

to an area with a stronger signal.

Upon a successful image transmission your images will appear

in your image inbox within a couple of minutes. Remember to

refresh your app (by swiping down on the screen) or refresh your

computer screen to see the images.

When you set up your camera in the field, the camera will auto-

matically connect to the Strike Force Wireless servers and con-

nect to your account. The camera will update its settings and

communication times with the ones set in the camera settings

menu of your online account or mobile app.

BROWNING TRAIL CAMERAS

6 7