Instruction Manual

MULTI SHOT MODE OFF :
Off: This is the default setting. The camera will only take 1 picture when trig-
gered.
Standard: The options available are 2 – 8 shots in this mode. The shots will
happen each trigger event in a burst 3 seconds apart.
Rapid Fire: The options available are 2 – 8 shots in this mode. The shots
will happen each trigger event in a burst with only 0.3 seconds between each
picture.
TEMP UNIT The temperature units can be displayed in Image Data Strip in
either Fahrenheit or Celsius.
CAMERA NAME You can add a custom name for the camera. This option is
limited to 10 characters.
IMAGE DATA STRIP Your trail camera has an information bar that is printed
at the bottom of each photo or video taken. This bar shows: Temperature, Moon
phase, Date, Time and Camera Name.
MOTION TEST This feature helps you aim the camera at your target area.
With the motion test turned on, simply walk around in your target area. When
your presence is detected, a red LED on the front of the camera will flash.
MOTION DETECT You have the option to set the Motion Detection distance.
Options are 60ft. or 80ft.
BATTERY TYPE To achieve the most accurate battery level reading, the cam-
era can be adjusted to monitor either Alkaline, Lithium or Rechargeable bat-
teries.
TRIGGER SPEED Your camera can be configured to a custom trigger speed
of Normal (0.7 seconds) or Fast (0.13 seconds). We recommend Normal for
areas where game is moving slowly, such as feeding areas. The Fast setting is
typically used for monitoring trails.
DEFAULT SETTINGS This selection returns your camera back to the factory
options for each setting. (Cell carrier option will not reset)
SMART IR VIDEO Smart IR Video is a feature that will allow a daytime video
clip to keep recording as long as the camera detects movement during filming.
If the subject stands still in front of the camera and the camera does not detect
movement, the camera will end the video clip. The maximum record time for a
video clip using this feature is 5 minutes.
SD MANAGEMENT By turning this option on, the camera will erase the oldest
pictures or videos on the SD card when it becomes full. This allows for the
camera to continue taking pictures or videos if you can’t get to the field to swap
out the SD card.
DELETE ALL By selecting Delete All, every image on the SD card is erased
permanently. This function also keeps the card formatted to the trail camera.
We suggest using the Delete All function and reformat the SD card each time it
is installed in the camera for use.
IR FLASH POWER
LONG RANGE : This option has a flash range of 100’ and uses an invisible
infrared flash.
ECONOMY : This is a great battery saving setting if you are in a heavily wood-
ed environment, where flash distance is limited.
LTE FEATURE This setting allows you to turn the cellular function of the cam-
era on or off. Leave the setting in the “LTE Enable” setting to enable cellular
communication.
LTE INFO This menu option will display the LTE, ICCID and LTE FW version.
LTE CARRIER This menu item displays the cellular carrier for this device.
NETWORK STATUS This menu item displays the signal strength.
SERVER STATUS This menu item displays the subscription quota.
LTE TEST This feature will allow you to run a cellular test in the field. Simply
Press the ENTER button, and your camera will make a cellular connection.
LTE CARRIER This menu will re display the QR code for activating the camera
on the Strike Force Wireless app.
ANTI THEFT The Anti Theft system alerts you when your camera is experi-
encing unexpected movement in the field. If your camera detects it is being
moved, it will automatically capture photos, and upload them with updated GPS
coordinates to your Strike Force Wireless account. This feature can be enabled
or disabled in your Strike Force Wireless app.
ANTI THEFT SENSITIVITY The sensitivity setting for the Anti Theft trigger
can be set to LOW, MEDIUM or HIGH. Low sensitivity works for most situations.
CAPTURE TIMER This setting allows you to set a certain period of time for
the camera to capture images. The default setting is 24 hour, continuous mon-
itoring. You can set the START and STOP times as desired, if you want to skip a
certain time period. The capture timer is most used in instances where a user
may want to pause picture or video recording of events during the day, and only
record night time activity.
FIRMWARE UPGRADE The Firmware Upgrade option allows you to upgrade
your cameras firmware. If a firmware upgrade is available for your camera it
will be posted on our website, along with detailed instructions for upgrading.
www.browningtrailcameras.com/customer-service
BROWNING TRAIL CAMERAS
10 11
WWW.BROWNINGTRAILCAMERAS.COM