Owner's Manual

The barrel and action of this pistol have been made with substantial

safety margins over the pressures developed by established American

loads. However, we assume no responsibility for incidents which occur

through the use of cartridges of nonstandard dimension or those

developing pressures in excess of SAAMI (Sporting Arms and

Ammunition Manufacturers’ Institute) established standards.

BUCK MARK PISTOLS MUST BE USED WITH ONLY 22 LONG RIFLE

RIMFIRE AMMUNITION AS DESIGNATED ON THE BARREL. DO NOT

SHOOT 22 SHORT OR 22 LONG AMMUNITION OR BLANKS.

ALWAYS READ THE AMMUNITION LABEL AND ANY ENCLOSURES WITH THE

AMMUNITION TO ASSURE THAT THE AMMUNITION IS APPROPRIATE OR

THAT THERE IS NO RESTRICTION FOR ITS USE WITH YOUR FIREARM.

MAGAZINE CAPACITY

The magazine capacity of the Buck Mark Pistol is 10 cartridges.

WHEN LOADING YOUR PISTOL ALWAYS KEEP THE MUZZLE POINTED IN

A SAFE DIRECTION, THE “SAFETY” IN

THE ON SAFE POSITION, AND

YOUR FINGERS AWAY FROM THE

TRIGGER. FAILURE TO FOLLOW

THESE WARNINGS COULD RESULT IN

SERIOUS INJURY OR DEATH.

REMOVING AND LOADING THE

MAGAZINE

1 Inspect the chamber to be sure it

is empty (Figure 4).

2 Pull the slide rearward and

push the slide release/stop

FIGURE 4

With the slide locked to the rear, inspect the

chamber to be sure it is empty.