Owner's Manual

EXTRA BARRELS

BEFORE INSTALLING ACCESSORY BARRELS ON YOUR SHOTGUN, READ

THE FOLLOWING GUIDELINES TO ENSURE THE BARREL/SHOTGUN

COMBINATION IS SAFE. PLACE THE “SAFETY” IN THE ON SAFE POSITION.

OPEN THE ACTION AND MAKE CERTAIN YOUR SHOTGUN IS COMPLETELY

UNLOADED. KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. FAILURE

TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY

OR DEATH.

The versatility of your new shotgun can be extended with an extra

barrel. All Gold 10-Gauge shotgun barrels are interchangeable. No

special fitting is required.

MOUNTING A SCOPE

BEFORE MOUNTING A SCOPE, SIGHT OR OTHER ACCESSORIES TO YOUR

SHOTGUN, PLACE THE “SAFETY” IN THE ON SAFE POSITION. OPEN THE

ACTION AND MAKE CERTAIN YOUR SHOTGUN IS COMPLETELY UNLOADED.

KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. FAILURE TO FOLLOW

THESE WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH.

Some Gold 10-Gauge shotguns are designed to accept a scope or other

optical sight, usually these are turkey models. If your shotgun’s

receiver is drilled and tapped for scope mounts, three holes (in line on

top of the receiver) will be visible. They are fitted with filler screws. If

your shotgun is drilled and tapped, adhere to the following:

YOUR SHOTGUN IS DRILLED AND TAPPED FOR THE MOUNTING OF

BASES AND RINGS TO ACCOMMODATE AN APPROPRIATE SCOPE OR

SIGHT. ALWAYS USE THE CORRECT BASES FOR THIS SHOTGUN WITH

THE APPROPRIATE 8-36 THREAD SCREWS WHICH ARE AT LEAST

IN LENGTH.