Owner's Manual

3 Use a drive punch or similar

object to push inward on the

trigger guard pins, using

caution not to scratch the

receiver (Figure 4). Trigger

guard pins may be removed

from either side of the

receiver. Push the trigger

guard pins clear through the

opposite side of the receiver.

It may be necessary to pull on

the trigger pins to remove

them from the receiver (Figure 4-A).

4 Grasp the trigger guard and pull it up and out of the receiver

(Figure 4-B).

5 Perform any cleaning of the parts and receiver cavity as necessary.

DO NOT DISASSEMBLE THE TRIGGER GROUP BEYOND THIS POINT.

FIGURE 4-A

Push the trigger guard pins through the other

side of the receiver.

FIGURE 4

Use a drive punch to push inward on the

trigger guard pins.

FIGURE 4-B

Grasp the trigger guard and pull it up and out of

the receiver.

01-414-BFA_[Gold_OM] 8/7/03 8:51 AM Page 14