Owner's Manual

spring retainer tab is locked in
place in its slot in the magazine
window.
5 Reinstall the magazine cap. If, at
some future time, you wish
to limit your gun to three shots
again, unscrew the magazine
cap and remove the magazine
spring retainer. Lightly press
the three-shot adapter to force
the magazine spring rearward
until the base of the three-shot adapter is level with the end of the
magazine tube. Replace the magazine spring retainer and magazine
cap.
INSTRUCTIONS FOR INSTALLATION OF
SPACERS TO ADJUST DROP AT COMB
Three spacers have been included with your Gold Fusion autoloading
shotgun which fit between the buttstock and receiver, to allow
adjustment at comb and heel. Each is labeled/stamped for what
each does. These spacers and respective stamps are defined as follows:
(Figure 7).
18
FIGURE 6
Depress the magazine spring retainer tab, and
ease out the retainer.
FIGURE 6-A
Remove the magazine spring and plug.
FIGURE 6-B
Remove the magazine 3-shot adapter.
00479BFA/Fusion OM 8/11/03 3:55 PM Page 18