Brochure

129
I. D.
O. D.
Table No. 1 Bushing Specifications
FHPandFHPKBushings
IncreaseApplicationsofFinishedBoreItems!
“FHPK” Bushings are furnished complete with keys and are packaged
5 pieces per carton.
Note: These bushings are held in place by fit and friction only.
TableNo.2 FHPBushings
“FHP” Bushings are furnished without keys or keyseats and should
be used only on low torque applications. They are packaged 3 pieces
per carton.
FHP23K-FHP17
Sprocket with 1/4" bore, 3/16 x 3/32 keyway,
reduced to 5/8 bore with FHP3K bushing and
3/16 x 1/4 key. Key is furnished with bushing.
Gear with 1" bore, 1/4 x 1/8 keyway, reduced
to 3/4 bore with FHP4K bushing and 1/4 x
1/4 - 3/16 x 3/32 key. Key is furnished with
bushing.
FHP Sheave with 3/4" bore reduced to 1/2"
bore with FHP1 bushing.
Note: Setscrew extends through hole in
bushing to shaft.
TypicalApplications
I. D.
O. D.
Bushing
Part No.
O.D. I.D. Length Key
Wt.
per
Carton
FHP23K 5/8” 1/2” 1 1/8” 3/16” x 5/32” - 1/8” x 1/16” .3
FHP1K 3/4 1/2 1 1/8 3/16 x 7/32 - 1/8 x 1/16 .5
FHP8K 3/4 9/16 1 1/8 3/16 x 5/32 - 1/8 x 1 1/16 .4
FHP2K 3/4 5/8 1 1/8 3/16 x 1/4 .3
FHP3K 1 5/8 1 1/8 1/4 x 5/16 - 3/16 x 3/32 .8
FHP9K 1 11/16 1 1/8 1/4 x 9/32 - 3/16 x 3/32 .7
FHP4K 1 3/4 1 1/8 1/4 x 1/4 - 3/16 x 3/32 .6
FHP10K 1 13/16 1 1/8 1/4 x 7/32 - 3/16 x 3/32 .5
FHP5K 1 7/8 1 1/8 1/4 x 5/32 - 3/16 x 3/32 .4
FHP20K 1 15/16 1 1/8 1/4 x 9/32 .3
FHP12K 1 7/16 1 1/16 1 3/8 3/8 x 11/32 - 1/4 x 1/8 1.6
FHP13K 1 7/16 1 1/8 1 3/8 3/8 x 1/4 - 1/4 x 1/8 1.4
FHP14K 1 7/16 1 3/16 1 3/8 3/8 x 9/32 - 1/4 x 1/8 1.2
FHP15K 1 7/16 1 1/4 1 3/8 3/8 x 1/4 - 1/4 x 1/8 1.0
FHP16K 1 7/16 1 5/16 1 3/8 3/8 x 7/32 - 5/16 x 5/32 .7
FHP17K 1 7/16 1 3/8 1 3/8 3/8 x 3/16 - 5/16 x 5/32 .5
Bushing
Part No.
O.D. I.D. Length
Wt
per
Carton
FHP18 1/2” 1/4” 1 1/8” .3
FHP21 1/2 5 1/6 1 1/8 .2
FHP22 1/2 3/8 1 1/8 .2
FHP19 1/2 7/16 1 1/8 .1
FHP23 5/8 1/2 1 1/8 .3
FHP6 3/4 3/8 1 1/8 .5
FHP7 3/4 7/16 1 1/8 .5
FHP1 3/4 1/2 1 1/8 .4
FHP8 3/4 9/16 1 1/8 .3
FHP2 3/4 5/8 1 1/8 .2
FHP11 1 1/2 1 1/8 1.0
FHP3 1 5/8 1 1/8 .8
FHP9 1 11/16 1 1/8 .7
FHP4 1 3/4 1 1/8 .6
FHP10 1 13/16 1 1/8 .4
FHP5 1 7/8 1 1/8 .3
FHP20 1 15/16 1 1/8 .2
FHP12 1 7/16 1 1/16 1 3/8 1.4
FHP13 1 7/16 1 1/8 1 3/8 1.2
FHP14 1 7/16 1 3/16 1 3/8 1.0
FHP15 1 7/16 1 1/4 1 3/8 .8
FHP16 1 7/16 1 5/16 1 3/8 .5
FHP17 1 7/16 1 3/8 1 3/8 .3