User's Manual

Product Specification and User Manual RFID GEN3 System
CONFIDENTIAL
Page 10 of 34
Applicable Standard and Regulations
 ISO/IEC 15693-1:2000 Identification cards — Contactless integrated circuit(s)
cards — Vicinity cards — Part 1: Physical characteristics.
 ISO/IEC 15693-2:2006 Identification cards — Contactless integrated circuit cards
— Vicinity cards — Part 2: Air interface and initialization.
 ISO/IEC 15693-3:2009 Identification cards — Contactless integrated circuit cards
— Vicinity cards — Part 3: Anticollision and transmission protocol.
 Maxim 1-Wire protocol – DS2401, 195860 rev 5/11, May 2011.
 ISO 11898-1:2015 – Road vehicles – Controller Area Network (CAN) – Part 1:
Data link layer and physical signalling
 SSCC/11 Snowmobile Safety and Certification Committee
 ISO 13590 Small craft - Personal watercraft - Construction and system installation
requirements
 USCG 33 CFR Title 33, Part 183
 ISO 8846 Small craft -- Electrical devices -- Protection against ignition of
surrounding flammable gases
 IN 40050 Protection of electrical equipment against contact, foreign bodies &
water.
 EN 55012:2007 Vehicles, boats and internal combustion engines – Radio
disturbance characteristics – Limits and methods of measurement for the
protection of off-board receivers (CISPR 12:2007)
 EN 55025:2003 Vehicles, boats and internal combustion engines — Radio
disturbance characteristics — Limits and methods of measurement for the
protection of off-board receivers (CISPR 25:2003).
 EN 61000-6-1:2007 Electromagnetic Compatibility – Generic immunity Standard,
Part 1: Residential, Commercial and Light Industry
 IEC 61000-4-2, Edition 2.0, 2008 Electromagnetic compatibility (EMC) - Part 4-2:
Testing and measurement techniques - Electrostatic discharge immunity test
 IEC 61000-4-6, Edition 3.2, 2010 Electromagnetic compatibility (EMC) - Part 4-6:
Testing and measurement techniques – Immunity to conducted disturbances,
induced by radio-frequency fields