User's Manual

Product Specification and User Manual RFID GEN3 System
CONFIDENTIAL
Page 27 of 34
7.2 Noise Sources Identifications
The RFID Post shall be located away from vehicle radiated sources. A minimum of 15 cm
in any direction between a radiated noise source and the RFID GEN3 System is
recommended. This intended position shall be validated in any new vehicle or
configuration change, using the diagnostic tool described in section 8.
The following documents shall be used as references for RFID GEN3 Post vehicle
localisation and Noise interference reduction guidelines.
000001 FO-QA-029-KA Skidoo 600 ETEC Capacitor Grounding Return Problems
000002 FO-QA-029-KA RFID DESS Grounding Problems
000003 FO-QA-029-KA SKIDOO TUNDRA 600 ETEC Harness Problems
000004 FO-QA-029-KA SKIDOO TUNDRA 600 ETEC Radiation Problems