User's Manual

Product Specification and User Manual RFID GEN3 System
CONFIDENTIAL
Page 28 of 34
8 Diagnostic Tool
KA has designed a tool to analyze performance using the RFID Post. This tool allows the
monitoring of performance of the RF transmission between the RFID Key and Post in real
time. This tool can be used to diagnose conducted noise, radiated noise or transmission
perturbations due to proximity of metallic materials. This tool shall be used to validate
intended mounting position of the RFID GEN3 System on any new vehicle or change in
the configuration of an existing one.
8.1 CAN Variant
All the tool listed above are build-in the CAN variant software and readings are available
through the diagnostic tool (CADET or BUDS). No special device/equipment is needed.
The base station is connected to diagnostic tool using a standard CAN to USB interface.