Specifications

46
Product Information
SPECIFICATIONS
200, 225, 250 Models
Displacement 200.1 cu. in. (3279 cc)
Engine Type 90° V, 6 Cylinder, Two-Cycle, E-TEC
Full Throttle Operating
Range
200 HP – 4500 to 5800 RPM
225 HP – 4500 to 5800 RPM
250 HP – 4500 to 5800 RPM
Power
(1)
(1) Rated following the standards of ICOMIA 28.83, ISO 3046 and NMMA.
200 HP – 200 HP (149.1 kw) @ 5150 RPM
225 HP – 225 HP (167.8 kw) @ 5150 RPM
250 HP – 250 HP (186.4 kw) @ 5150 RPM
Idle RPM in Gear
(2)
(2) Emission Control Information.
500 ± 50
Idle RPM in Neutral
(2)
500 ± 50
Ignition Timing
(2)
Controlled by the outboard’s EMM
Emission Control System:
per SAE J1930
(2)
ECM, E-TEC (Engine Control Module, E-TEC)
Fuel Requirements
(2)
87 Pump Posted AKI (90 RON) – Refer to Oil and Fuel on
page 17
Oil – Lubricant Evinrude/Johnson XD100 oil or TC-W3RL NMMA-certified oil
– Refer to Oil and Fuel on page 17
Warning Signals Controlled by the outboard’s EMM
Battery, Minimum
(3)(4)
(3) Use a 750 CCA (940 MCA) battery when operating in temperatures below 32°F (0°C).
(4) Under extraordinary electrical load or environmental conditions, use a 107 amp-hour minimum battery
(generally available in group 29 size).
675 CCA (845 MCA) 12 volt or
750 CCA (940 MCA) 12 volt below 32°F (0°C)
Spark Plug
(2)
Refer to ECI Label