Specifications

FUEL AND OIL PRIMING

OIL SUPPLY PRIMING

Observe oil flow through all oil distribution hoses.

Air must be purged during the priming procedure.

Make sure that oil flows through the rear oil distri-

bution manifold to the cylinder block fittings.

Small bubbles are acceptable. Large bubbles

must be eliminated through continued priming.

Repair any fuel or oil leaks.

The oiling system on these models can also be

primed using the Self-Winterizing feature if diag-

nostics software is not available. Refer to Opera-

tor’s Guide.

90° V6 Models

1. Oil distribution hoses

004224

60° V4–V6 Models

1. Oil distribution hoses

004965

1. Rear oil distribution manifold 008016

1. Oil distribution hose

2. Small bubbles

3. Large bubbles

004398