Specifications

FUEL AND OIL PRIMING

OIL SUPPLY PRIMING

15 – 90 HP Models

Use Evinrude Diagnostics software to make sure

the EMM is programmed for the type of oil being

used.

Start the outboard. Use the oil priming function in

the software to make sure the system is com-

pletely primed.

Use the Prime Oil System button of the Dynamic

Test screen to prime the oil pump.

Observe oil flow through all oil distribution hoses.

Air must be purged during the priming procedure.

Small bubbles are acceptable. Large bubbles

must be eliminated through continued priming.

Repair any fuel or oil leaks.

The oiling system on these models can also be

primed using the Self-Winterizing feature if diag-

nostics software is not available. Refer to Opera-

tor’s Guide.

Dynamic Test Screen

1. Prime Oil System button

008083

40 – 90 HP Models

1. Oil distribution hoses

007997

15 – 30 HP Models

1. Oil distribution hoses

007130

1. Oil distribution hose

2. Small bubbles

3. Large bubbles

004398