Specifications

27
 OPERATION
If the following directions are not suitable for
your boat’s control, see your Dealer before
proceeding.
Shifting — ICON Controls
With engine running and control handle in
NEUTRAL:
Move the control handle fore or aft until it en-
gages the forward or reverse gear detent.
Speed Control — ICON Controls
After gear engagement, move the control
handle slowly in the same direction to in-
crease speed.
Press the RPM + or – button to fine tune en-
gine speed up or down in 1% increments.
Engine Synchronization — ICON
Controls
Press the SYNC button to automatically syn-
chronize the RPM of multiple engines. The
SYNC button also transfers control of all en-
gines to the port lever on the control.
Single Lever ICON Control
1. Handle – shift and throttle
2. Trim/tilt switch
3. Fast idle (neutral) button
4. RPM Tune button
5. Gear position indicators
007289
Dual Lever ICON Control
1. Handle – shift and throttle
2. Master Trim/tilt switch
3. Individual engine trim switches
4. Fast idle (neutral) button
5. PowerSync button
6. RPM Tune button
7. Gear position indicators
007290
3
2
4
1
5
1
2
3
4
1
5
6
7