Specifications

40
Using Your Evinrude E-TEC Outboard
position. Lower the outboard to its vertical po-
sition.
TRANSPORTING / STORAGE
If the outboard is removed from the boat for
transportation or storage, you MUST seal the
oil and fuel lines on the boat and on the out-
board to prevent leaks and prevent contami-
nants from entering the oil or fuel system.
The oiling system must be primed before re-
using the outboard. Refer to Priming the Oil
System on page 19.
DR5074
A WARNING
A small amount of fuel may be released
when the fuel line is disconnected.
Always wipe off any fuel spillage.
Gasoline is extremely flammable and
highly explosive under certain condi-
tions. Do not allow disconnected fuel
hoses to leak fuel.
Use caution when working on the fuel
system. Wear safety glasses and work in
a well ventilated area. Extinguish all
smoking materials and make certain no
open flames or ignition sources exist.
Always wipe off any fuel spillage.